Wire-Aide Wire-Pulling Lubricant, Non-Toxic, Slick Waxy Formula, Suitable for Fiber Optic Wire, 1 gal. Pail

Part # 79-002

Wire-Aide Wire-Pulling Lubricant slides on smoothly and clings throughout the pull. This go-to lubricant won't damage conduit or insulation and is More...

WHERE TO BUY
Each in Package Height (in) * 7.2
Each in Package Width (in) * 7.1
Each in Package Length/Depth (in) * 6.9
Each in Package Weight (lbs) * 8.967
Inner Pack Weight (lbs) * 38.5
RoHS Compliant (Restriction of Hazardous Substances Directive) ° Contact Compliance
Abrasion Protection Excellent
Base Modified Wax
Cling Ability Excellent
Color Yellow
Corrosion Test Non-corrosive to metals
Condition on Drying Waxy-film
FlashPoint Flash Point Non-combustible
Freeze-Thaw Stability OK/3 cycles
Freezing Point 28 deg F
Hardening Character Non-hardening
Lubricity Excellent
pH Approx. 6.5 - 7.0
Removal Soap and hot water
Shelf Life Indefinite
Staining Properties Non-staining to hard surfaces
Viscosity 66,000 - 94,000 cps. at 10 rpm
Water Resistance Repels water to some extent

Wire-Aide Wire-Pulling Lubricant slides on smoothly and clings throughout the pull. This go-to lubricant won't damage conduit or insulation and is suitable for fiber-optic wire. The yellow modified wax-base formula offers the viscosity of a heavy cream-like paste and dries to a slippery waxy film that cleans up quickly with soap and hot water. Formula is non-toxic, non-hardening, non-combustible, non-staining to hard surfaces and non-corrosive to metals and withstands multiple freeze-thaw cycles without drying out in the container making it's shelf-life indefinite. Viscosity: 66,000 - 94,000 cps. at 10 rpm Available in three sizes, 1 quart, 1 gallon and 5 gallon.

  • Greaseless, non-toxic compound will not stain skin, clothing or construction trim; cleans up quickly with soap and water
  • Stable and safe to use. Withstands normal temperature extremes and will not dry out in the container
  • Non-combustible, non-conductive and non-corrosive
  • Will not damage conduit or insulation
  • Remains stable with multiple freeze-thaw cycles
  • Suitable for fiber-optic wire
  • 1 gallon pail weighs 9 lbs
  • Viscosity: 66,000 - 94,000 cps. at 10 rpm
  • PH: Approx. 6.5 - 7.0
  • Freezing Point: 28 deg F