Poly-Gel Cable-Pulling Lubricant, Water Based Non-Toxic, Non-Hardening Formula, +28 deg F to +200 deg F, Blue, 1 gal. Pail

Part # 79-202

Reach for Gardner Bender Poly-Gel when you begin your next cable pulling project. Perfect for all types of insulation and conduit, including More...

WHERE TO BUY
Each in Package Height (in) * 7.6
Each in Package Width (in) * 7.75
Each in Package Length/Depth (in) * 7.75
Each in Package Weight (lbs) * 9.422
Inner Pack Weight (lbs) * 37.69
RoHS Compliant (Restriction of Hazardous Substances Directive) ° Contact Compliance
Base Poly-oxyethylene/Water
Cling Ability Excellent
Color White
Corrosion Test Non-corrosive
Condition on Drying Semi-fluid film
FlashPoint Non-combustible
Freeze-Thaw Stability Excellent
Freezing Point 28 deg F
Lubricity Excellent
pH 7.2 - 8.2
Removal Soap and water
Shelf Life Indefinite
Staining Properties Non-staining
Viscosity 70,000 - 110,000 cps. at 10 rpm

Reach for Gardner Bender Poly-Gel when you begin your next cable pulling project. Perfect for all types of insulation and conduit, including fiber-optic cable, cable with low-density, linear low-density polyethylene, polyurethane and semi-conducting jackets this water-based clean blue gel will not gum-up or harden on conduit and dries to a clear non-conductive semi-fluid film for easy handling, stripping and terminating of the cable. You choose your application method; manually or with a pump, and this non-toxic, non-corrosive, and non-staining formula will get the job done. Standard poly-gel handles applications in weather conditions from 28 deg F to +200 deg F (for temperatures down to -10 deg F look for our All Season Poly-Gel formula MFG# 79-301). Product is blue in color and offers a thick clear gel viscosity with a pH of 7.2 - 8.2. With an indefinite shelf life this lubricant will always be ready for the job at hand. One gallon pail weighs 8.75 lbs.

  • Non-staining, non-toxic clear gel formula is water-based for easy soap and water cleanup
  • Workable over wide temperature range: - Poly-Gel +28 deg F to +200 deg F
  • Freezing Point: 28 deg F
  • PH: 7.2 - 8.2
  • Dries to a clear, non-conductive semi-fluid film for easy handling, stripping and terminating of cable
  • PH: 7.2 - 8.2
  • Viscosity: 70,000 - 110,000 cps. at 10 rpm

Warranty One Year